Control System Health - Asset Management

As your fleet of assets grows, maintaining and monitoring those assets becomes not only more important, but more challenging.  What firmware version is the asset on?  Do we have any faults?  How is the asset running and performing?  These are but a few of the questions that plague operators every day.

Continue Reading

Tags:

What does an Industrial Internet Control System look like?

In my last post (read it here), I brought up the concept of Industrial Internet Control Systems (IICS) and put up a video from GE that described the concept and what they were doing to make these types of systems viable and useful for their customers. But what exactly does one of these controllers look like?

Continue Reading

A Control System for the Industrial Internet

We've all heard the buzz for quite a while now about the Industrial Internet of Things (IIoT) and the emergence of Industry 4.0; last week, my counterpart Carl, posted a video that gives a quick overview of GE's Predix, which is GE's take on the IIoT(see his post by clicking here). I find a lot of the conversation surrounding the Industrial Internet is about cloud connectivity and Edge devices, talking about outcomes and what we can expect from the this connected world, and while that is the most important part of the message, it falls short of actually talking about how to make it actually happen. So how are companies like GE going to make the IIoT happen for their customers?

Continue Reading

Introducing the PACSystems EPSCPE100

In keeping pace with the technology of today, most PLC/PAC vendors have been working towards smaller, more cost effective controls systems. The problem with this is that often when smaller and cheaper happen, the robustness, capability or flexibility of the controller suffers as a result. Often you end up with a micro or "shoebox" style controller that limits you on the base I/O to a few options and then doesn't have very good, if any, options for expandability and the programming environment may be limited as well.

Continue Reading

ProfiNet Myths Debunked

Myth 1: Profinet Isn’t Ethernet

I have now had several people mention this to me while discussing ProfiNet. I believe this myth to be propagated due to the protocol name not having “Ethernet” or “TCP” in it’s name. This myth is completely false. To counter this myth, we look to the OSI Model. Ethernet (also referred to as IEEE 802.3), is part of the Physical, and Data Link Layers of the OSI Model.

Continue Reading

Migrating from an IC693RTM705 to an IC695CMM002

Recently, I had the opportunity to assist a customer in migrating their 90-30 to a PACSystems RX3i controller. Machine Edition made quick work of converting the hardware config and code, however 1 particular module posed a problem; this customer was using a Horner HE693RTM705 Modbus Master. The RX3i does not support this module and its functionality has been replaced by the IC695CMM002. Looking over the code for this, the conversion appeared daunting at first, but with a couple of handy resources and a spreadsheet or two, the conversion was relatively painless.

Continue Reading